Electro Industries SM1-16 Instrukcja Użytkownika Pobierz pdf (Strona 25)

Electro Industries/GaugeTech

Doc #: E113-7-07 V1.04 2-5

Use ONLY Channel 1 when setting up configuration. Disregard Channel 2.

Make sure the Baud Rate is 57600.

If you happen to change something in the configuration by mistake, choose 7, Factory Defaults

at the bottom of the screen, reconfigure Channel 1 to have 57600 Baud Rate.

To change the IP Address, choose “0”, Server Configuration and type new IP Address (consult

your Network Administrator for the proper IP Address).

After you have made any and all changes required, choose 9, Save and Exit to save changes

and disconnect from Telnet.

BAUD RATE

The Ethernet Interface and attached serial device (SM1-16) must agree on a speed or baud rate used

for the serial connection. For the Substation Multiplexor, default settings are 57600 baud rate, 8

data, 1 stop, no parity.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Brak uwag

Electro Industries SM1-16 Instrukcja Użytkownika Strona 25